Ch 17: Secondary Storage and Device Drivers

183 Questions183 MCQs0 Short Questions0 Long Questions
๐ŸŽฏ Exam Practice Papers
SEMESTER PASS

CS401 - Computer Architecture and Assembly Language Programming Examination Practice

Timed practice exam simulation for CS401 - Computer Architecture and Assembly Language Programming.

๐Ÿ“˜ VU MID TERM EXAMLectures 1 to 22
โฑ๏ธ 60 Mins

Mid Term Examination

Covers syllabus of Lectures 1 to 22 with 30 high-yield MCQs in a timed exam environment.

๐Ÿ“30 MCQs
โฑ๏ธ60 Minutes
๐Ÿ“— VU FINAL TERM EXAMLectures 23 to 45
โฑ๏ธ 90 Mins

Final Term Examination

Comprehensive semester exam preparation with 45 MCQs covering Lectures 23 to 45 with complete course coverage.

๐Ÿ“45 MCQs
โฑ๏ธ90 Minutes
Showing 151 โ€“ 160 of 183 Questions
Page 16 of 19
Q151
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ INT 13h BIOS Disk Service Function 03hEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
In BIOS Low-Level Disk Services (INT 13h), what action is performed when service function AH = 0x03 is requested?
๐Ÿ’ป assembly Snippet
mov ah, 0x03
int 0x13
  1. A.Get drive parameters
  2. B.Reset disk sector
  3. C.Write disk sector
  4. D.Read disk sector
Q152
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ Data Bus Bi-directional OperationEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
Regarding signal transmission direction between the processor, system RAM, and peripheral devices, the System Data Bus is:
  1. A.Uni-directional
  2. B.Bi-directional
  3. C.Non-directional
  4. D.None of the given
Q153
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ PUSH Instruction Stack Pointer OperationEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
True or False: The PUSH instruction increments the Stack Pointer (SP) by two bytes before transferring a word operand to the top of stack.
๐Ÿ’ป assembly Snippet
push ax
  1. A.True
  2. B.False
Q154
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ Static and Dynamic Thread Creation ModelsEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
In operating system multithreading design, thread creation and initialization can be performed:
  1. A.Static
  2. B.Dynamic
  3. C.Both
  4. D.None of the above
Q155
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ Parallel Port IRQ AssignmentEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
Which hardware IRQ interrupt line is assigned to the primary parallel printer port (LPT1) in IBM PC compatible systems?
  1. A.IRQ 4
  2. B.IRQ 5
  3. C.IRQ 6
  4. D.IRQ 7
Q156
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ 8259 PIC IRQ Hardware Priority HierarchyEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
In the 8259 Programmable Interrupt Controller (PIC) hardware priority scheme, what is the priority level assigned to IRQ 0 (System Timer Interrupt)?
  1. A.Highest
  2. B.Low
  3. C.Medium
  4. D.None of the above
Q157
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ DB-25 Parallel Port Pin SpecificationsEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
How many total signal and ground pins are present in a standard DB-25 parallel printer port connector?
  1. A.20
  2. B.25
  3. C.30
  4. D.35
Q158
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ Process Control Block (PCB) Context PreservationMedium๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
In operating system process management, all general-purpose CPU registers, segment registers, and stack pointers of an interrupted process are saved inside which kernel data structure during context switching?
  1. A.Process Control Block (PCB)
  2. B.Instruction Register (IR)
  3. C.Program Counter (PC)
  4. D.Segment Register (SR)
Q159
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ Interrupt Register Push Operations (FLAGS, CS, IP)Easy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
When an interrupt call (INT instruction) occurs, the CPU automatically pushes new values onto the stack to save execution state, including CS, IP, and which other register?
๐Ÿ’ป assembly Snippet
int 0x21
  1. A.DS
  2. B.SS
  3. C.FLAGS
Q160
โ“ MCQ๐Ÿ“˜ CS401๐Ÿ“‘ Lec 17๐Ÿท๏ธ DB-9 Serial Port Pinout AssignmentsEasy๐Ÿ”โญ๐Ÿ’ก๐Ÿ“„๐ŸŽ“VU๐Ÿ›๏ธVU
In a standard 9-pin DB-9 serial communications connector, which pin is assigned to TD (Transmit Data)?
  1. A.Pin 1
  2. B.Pin 2
  3. C.Pin 3
  4. D.Pin 4