Explain the precise stack pushing order when an Interrupt Service Routine (ISR) is invoked via the INT instruction in 8088 assembly language, and why saving the FLAGS register automatically on the stack is necessary.
Ch 17: Secondary Storage and Device Drivers
Comprehensive capstone module covering cylinder-head-sector addressing, low-level disk sector reading/writing via INT 13h, boot sector layout, and assembling character device drivers.
183 Questions183 MCQs0 Short Questions0 Long Questions
SEMESTER PASS
CS401 - Computer Architecture and Assembly Language Programming Examination Practice
Timed practice exam simulation for CS401 - Computer Architecture and Assembly Language Programming.
Showing 41 โ 50 of 183 Questions
Page 5 of 19
What is an Interrupt Service Routine (ISR) or Interrupt Handler, and which assembly instruction is executed to generate a software interrupt in 8088 programs?
Explain the concept of Vectored Interrupts and the Interrupt Vector Table (IVT) in 8088 architecture. State where the IVT is located in physical memory, the size of each vector entry, and how segment and offset addresses are stored.
What does 'hooking an interrupt' mean in 8088 assembly programming? Explain how a program modifies an entry in the Interrupt Vector Table (IVT) to intercept or replace a system interrupt handler.
In 8088 architecture, how many total bytes are occupied by an entry in the Interrupt Vector Table (IVT), and what is the physical memory address for INT 0x10?
State the mathematical formulas used to calculate the memory offset addresses for Interrupt Vector 'n' in the Interrupt Vector Table (IVT), and determine the exact byte location range for Interrupt 2 (INT 2).
Detail the step-by-step CPU hardware execution sequence that occurs when interrupt 'n' is triggered (via software 'INT n' or hardware), and explain the reverse operation performed by 'IRET'.
Why is the Interrupt Vector Table (IVT) described as an indirection mechanism analogous to a book's Table of Contents?
What happens if an Interrupt Service Routine (ISR) terminates with 'RETF' instead of 'IRET'? Explain the resulting stack imbalance and caller expectations.
How does the 'IRET' (Interrupt Return) instruction differ from 'RETF' (Far Return) and standard 'RET' (Near Return) regarding stack memory operations?